雜訊比 dB
信噪比,即SNR(Signal to Noise Ratio),又称为讯噪比。狭义来讲是指放大器的输出信号的电压与同时输出的噪声电压的比,常常用分贝数表示,设备的信噪比越高表明它产生的杂音越少。一般来说,信噪比越大,说明混在信号里的噪声越小,声音回放的音质量越高,否则相反。信噪比一般不应该低于70dB,高保真音箱的信噪比应达到110dB以上。
所指為有用
訊號功率(Power of Signal)與
雜訊功率(Power of Noise)的比。因此為
振幅(Amplitude)比的平方:

它的單位一般使用
分貝,其值為十倍對數訊號與雜訊功率比:

其中
為訊號功率(Power of Signal)。
為雜訊功率(Power of Noise)。
為訊號振幅(Amplitude of Signal)。
為雜訊振幅(Amplitude of Noise)。
沒有留言:
張貼留言